The Baron cobbler shaker in two lines
A three piece cobbler holding 510ml in 18/10 stainless steel 1.2mm thick, 205mm tall and weighing 400g. It is built to the Japanese school, where the precision of the fit counts for more than the decoration.
Who it is for
For anyone who has already used cheap cobblers and broken or binned them. The difference between a shaker that lasts a season and one that lasts ten years is not the shape: it is the gauge of the metal and the precision with which the three parts meet. Here the supplier states both figures, which is rare.
One point two millimetres
That is the gauge of the steel, and it is the number that explains the price. A common cobbler sits under a millimetre, often around eight tenths: at that gauge the rim deforms at the first knock, and as soon as the body loses its perfect round the cap stops sealing and the shaker starts leaking. At 1.2mm the piece holds its shape after years behind a bar, and the Baron keeps the seal it had on day one. The trade-off is weight, 400g empty, which is more than almost any cobbler of the same capacity.
Specifications
- Capacity: 510ml
- Parts: 3, body, built-in strainer and cap
- Material: 18/10 stainless steel
- Gauge: 1.2mm
- Height: 205mm
- Weight: 400g
- Finishes: black, copper
- Dishwasher safe: no, both finishes are plated
The Japanese school, in concrete terms
In Japanese bartending the shaker is a precision tool: tight tolerances, surfaces that meet, a measured rather than an energetic movement. That is where the attention to gauge and to the finishing of the rims comes from, and those are the two things that make a cobbler reliable. It is not a matter of style: a shaker that seals lets you shake hard without holding the cap down with your thumb, and that changes the gesture.
Take the Baron if
The cobbler is your main shaker and you use it every day, you have already had pieces start leaking after a few months, and you want a tool you buy once. If instead the cobbler is for home or occasional use, the lighter models in the same category do the same job at a third of the price.
Care
Both finishes are plated, so keep it out of the dishwasher: mild soap, the three parts apart, and dry before reassembling. On a piece built to last ten years, thirty seconds of correct washing is the best return available.
How to spot a cobbler that lasts
Three checks, and you can do them in the shop. Weight: at equal capacity, a heavier piece has more metal and deforms less. The rim: run a finger round it and it should be round and continuous, with no sharp edges and no flat spots. And the closure: the cap should go on with even resistance all the way round, not soft on one side and tight on the other. They are the same criteria the Baron was built to, and they hold for any brand.
FAQ
How much does the Baron hold? 510ml, the size for one drink with its ice.
Why does it cost more than a common cobbler? The gauge of the steel, 1.2mm, and the precision of the fit: those are the two things that keep the seal over time.
What does it weigh? 400g empty, over 205mm of height.
Which finishes are there? Black and copper.
Dishwasher safe? No, the finishes are plated.
The more you buy, the less you pay: 4 pieces -5%, 6 -7%, 8 -10%, on the same item.
Dispatched from Rome, Italy. 15-day returns, free of charge. Questions before you order? Message us on WhatsApp on +39 351 929 6937.
To compare the cobblers there is the cocktail shaker guide.
Reviews
There are no reviews yet.