The Bars vintage bottle opener in two lines
The Bars vintage bottle opener is a V-rod opener in AISI 304 stainless steel: a flat piece that opens crown caps at one end and, at the other, has the slot for lifting pourers out of bottle necks. No moving parts. Besides the Vintage finish it comes in matt black and Tiffany.
Who the vintage bottle opener is for
For anyone who keeps pourers on the bottles during service and takes them off every night to wash them, and for anyone opening bottled beers and soft drinks at the bar. These are two moves that repeat, and they are the two moves this piece exists for. At home half of it is enough: it opens bottles, and it hangs up or sits in a drawer without taking room.

Why the vintage bottle opener is flat
The flat shape lets it sit in an apron pocket without catching and lie on the bar top without rolling. A bottle opener spends the night between the pocket, the bar top and the hand, so every extra millimetre of thickness is bulk you feel. A single piece has no joints to work loose: the check to make now and then is that the edges of the slot are still parallel.
Vintage, matt black or Tiffany
Vintage: visible steel with an aged surface, for the American bar and the venue built on classics, where a shiny opener clashes with the wood of the back bar. Matt black: it does not reflect and does not show fingerprints, for dark bar tops. Tiffany: aqua green, for the venue with a house colour; and a coloured opener is spotted at a glance on the bar top or in a colleague’s pocket.
Specifications
- Material: AISI 304 stainless steel
- Construction: one piece, no moving parts
- Functions: opening crown caps and removing pourers
- Finishes: matt black (OP03B), Vintage (OP03VT), Tiffany (OP03TY)
- Brand: The Bars
Choose the vintage bottle opener if
At the end of service you take the pourers off by hand or with a knife. At your station the bottle opener disappears every night and you need one per person. The same piece is in the 12 piece matt black cocktail set, the 12 piece Vintage cocktail making kit and the 12 piece Tiffany bartender set.
Why pourers come off every night
The spout stays full of liquid from the last pour and sits open to the air all night. On a dry spirit the harm is limited, on a sugary liqueur it is not: the syrup dries inside the tube, narrows the bore and changes the flow, so a timed pour is no longer the one it was set to. Sweet residue also draws insects. With the vintage bottle opener in hand, a round of twenty bottles takes a few minutes.
How to lever it the right way
Slot under the rubber flange of the pourer, piece at right angles to the neck, one upward push. Not at an angle: the lever works on one side, the spout bends, and a bent pourer pours crooked for good. When the bar is three deep it is better kept hanging than in a drawer: whoever opens the beers has it in sight, and whoever closes finds it without looking.
More bottle openers, one per person
One opener each saves passing it along the line. The more you buy, the less you pay: 4 pieces -5%, 6 -7%, 8 -10%, on the same item.
Care
Hot water and mild detergent at the end of service, paying attention to the slot, where the sticky film from the pourers collects. The manufacturer does not declare whether it is dishwasher safe, so the careful route is washing by hand, with no abrasive sponge on matt black and Tiffany, and drying it.
FAQ on the vintage bottle opener
What does it do besides opening bottles? It lifts pourers out of the neck, levering under the rubber flange.
Does it have moving parts? No, it is one piece.
Do the three finishes change the shape? No: the same shape, the same AISI 304 steel, only the surface changes.
Is it worth it if I do not use pourers? Less so: it opens bottles like any other bottle opener.
Dispatched from Rome, Italy.
The other models are in the bottle opener category.
Manufacturer and safety
Brand: The Bars
Manufacturer: World Group S.r.l., Via Roma, 92/94, 28010 Cavaglio d'Agogna (NO), Italy, info@thebars.it
Product: Vintage Bottle Opener V-Rod, AISI 304 Steel, 3 Finishes







Reviews
There are no reviews yet.