The steel speed rail 56cm in two lines
A speed rail in 18/10 AISI 304, the professional equipment alloy: about six bottles, a low front edge and slots for quick release.
Who it is for
For anyone building a fixed bar who does not want to think about it again. It is the piece you buy once and that stays there while the lists and the people around it change.
The low front edge changes the movement
With a high edge the bottle has to be lifted before it can be tipped, so the movement is in two stages; with a low edge you take it and bring it up in one. Repeated three hundred times an evening, that is the difference between a station that flows and one that jams, and it is the detail that separates a speed rail from a container.
Specifications
- Length: 560mm
- Capacity: about 6 bottles
- Material: 18/10 stainless steel, AISI 304
- Front edge: low
- Mounting: slots for quick release
- Weight: 1.3kg
Why AISI 304 in particular
Because it is the right choice for a spot that is permanently wet. What drips off the necks collects under the bar top, and with lesser steels that constant standing liquid brings pitting: small points of corrosion that start where the liquid sits and never go away. 18/10 stainless holds enough chromium and nickel to take that condition for years.
Steel or ABS
Steel lasts longer, takes knocks and sanitises better. ABS costs less, weighs less and softens the noise of the bottles. For a fixed bar in daily use steel pays for itself, because a rail under the counter takes knocks you never see: trolleys, knees, crates set down badly. For a seasonal station plastic is the sensible answer.
The 56cm rail on a fixed bar
It holds the bases of the list, arranged once and then left alone. The rule that applies at any length is that the order does not get changed on a whim: anyone who rearranges the line because it seems more logical to them costs the venue a week of slower service. If the order has to change, it changes with everyone and it gets written down.
When the 56cm is the better choice over the long one
When the counter is broken up. A sink, a well or a column breaks the clear run, and two short rails mounted either side cover what one long rail cannot. It also applies on a second service station, where only the bases are needed rather than the whole line.
Care
Unhook it and wash it separately every night, off the bar. Stainless takes detergent and hot water without trouble; what it does not take is liquid standing on it for hours, so dry it before remounting. No common steel wool on the surface, because it leaves iron particles that go on to rust in its place.
The cost, and how long it takes to pay back
A steel rail costs more than twice a plastic one, and the question is fair. The sum is done in years: on a fixed bar in daily use a steel speed rail stays in service as long as the bar does, while plastic at that rhythm gets replaced. If the station is permanent, steel is cheaper over time; if the venue is seasonal, it is not.
Mounting
The slots go onto supports that carry the load full, not empty: six full bottles are over six kilos, and the check is made by pushing down on the loaded rail before you call it mounted. A fixing that gives way always does it during a service, never during a test.
FAQ
How many bottles does the 56cm steel speed rail hold? About six, depending on diameter.
Which steel is it? 18/10 stainless, AISI 304, the professional equipment alloy.
What is the low front edge for? Taking the bottle out in one movement instead of two.
Steel or ABS? Steel on a fixed bar, ABS on a seasonal or mobile station.
Does it unhook? Yes, from the slots, so it can be washed off the bar.
What does it weigh? One kilo three hundred grams empty.
The more you buy, the less you pay: 4 pieces -5%, 6 -7%, 8 -10%, on the same item.
Dispatched from Rome, Italy. 15-day returns, free of charge. Questions before you order? Message us on WhatsApp on +39 351 929 6937.
The other sizes are in the speed rails category.
Reviews
There are no reviews yet.